331

Corsair 7000D Airflow model is a Full Tower case that offers many features of Obsidian 1000D, one of Corsair’s largest cases, for half the price. Among the details that stand out at first glance are high airflow, plenty of fan and radiator support. A large number of hard disk support and large internal volume are also important details.

Corsair Obsidian 1000D Super Tower Case Review

Corsair 7000D Airflow, which offers a large interior volume for this type of special needs, also does the Airflow in its name by leaving as few obstacles as possible in front of the fans thanks to its perforated case front.

Dimensions, Weight and Volume

When we look at its dimensions, we see 550 mm length, 248 mm depth and 600 mm height. With these dimensions, an interior volume of over 80 liters has been achieved. You understand the size of the case better when you collect the system inside. The ATX motherboard is literally tiny in the case. There are gaps on the top and bottom of the motherboard where you can easily pass the cables without pinching your fingers.

I should mention that besides its large dimensions, it is a very heavy case. Curb weight is around 19 Kg. Depending on how much you fill it, it’s easy to reach the points where carrying one person would be a problem.

Those who have some experience with special liquid cooling know that it is easier to do this in large cases, especially if you are going to use hard pipes. It’s really hard to plug the inlet and outlet points of pumps, reservoirs and blocks, attach sloped pipes to them, and tighten the unions.

Covers and Side Panels

One cover of the case is made of completely darkened tempered glass, and the other is made of flat sheet steel. Both covers are closed with clips that interlock from the top and bottom, and are opened with 2 hinges. There is a star screw on the upper hinges, when you unscrew them, you can completely remove the covers.

Like the side covers, the perforated front and top panels of the case can be easily removed by hand without the need for any tools. When we remove these panels, a dust filter with a plastic frame on the front and a magnetic dust filter on the upper part welcomes us. There is also a dust filter on the back cover. This filter faces the optional fan and radiator mounting point parallel to the motherboard. These are easy to access and wash. This is good news considering the number of fans that can be installed in the case. And of course, let’s not forget the dust filter for the power supply fan under the case.

Another point that caught my attention was the ease of attaching a fan or radiator to this case. The metal bracketdollarser, which you need to attach the fan and radiators on both the top and the front of the case, can be removed by loosening a few screws. You work comfortably on your desk, attach the parts to them, and then mount this bracketollarseries to your case.

Fan and Radiator Support

If you prefer 12 cm fans, you can use a total of 12 fans, 4 to the front, 3 to the top, 4 to the motherboard tray, and 1 to the rear. If you prefer 140 mm, you can install 7 fans, 3 at the front and top, and 1 at the back.

This model comes with 14 cm black AirGuide fans. One comes mounted on the back of the case, and two on the front. This is the version that is slightly more affordable than the other 7000 models, which are already affordable, so there are no RGB fans. These fans are connected to 6 PWM fan multipliers. You plug the cable coming out of this multiplexer into a fan slot on your motherboard. The multiplexer distributes the PWM signal to 6 fans with the power it receives from here and runs them all at the same speed.

At the radiator compatibility point, 420 and 480 mm radiators can be installed at the front, 360 and 420 mm radiators at the top, and up to 480 mm radiators on the motherboard tray. The dimensions of the radiators do not only change according to the width and length, we see many radiators in different thicknesses in the market. It is nice to support thick radiators in a special liquid cooling compatible case like the Corsair 7000D Airflow. The front of the power supply concealer is removable. If you use thick radiators on the front, you can open up space by attaching this piece that comes with the case.

7000X RGB

There is also a 7000X RGB model in the 7000 series. If what you’re looking for is plenty of RGB fans, a glass front panel, and an advanced RGB controller that comes with the case, this is the model you should look for. 7000X RGB full 4 x SP140 RGB Elite fans and Commander Core XT has a controller.

Storage and Power Supply

If you have a large number of 3.5-inch mechanical hard drives, you will like the 6-disk cage in the lower bay of the 7000D. These cages can be easily removed with a single finger screw. There are also 3 slots for SSDs. You can access them by opening the back cover of the case.

If you are using a long power supply, you can also use the space emptied by these cages to compile and collect the cables coming out of your power supply. Corsair has also put a small window in the power supply hider here. You can show the name and model of your power supply while hiding the cable clutter. What we use in this video Corsair RM850W The model name of the power supply and the positioning of the Corsair logo so that they can be seen from this window was also a nice detail.

Another feature I liked was that the front input and output slots were kept rich. There are 4 USB 3.0 type A sockets, one USB 3.1 type-C socket, a combined 3.5 mm headphone jack, reset and power keys.

Cable Management

Cable management was another area that Corsair focused on. As the volume is large, it becomes easier to allocate space for cable management. When you open the back cover, a second smaller inner cover welcomes us. This cover is also held in place with magnets. When we open this cover, we see that we are allowed to organize the cables in an area of ​​30 mm. Here are channels for routing cables and many points for attaching cable clamps.

Extended ATX Motherboard

There is a long and large hiding piece in front of the cable ducts next to the motherboard. They made it removable. My guess is that if you install an Extended ATX motherboard, you have to remove it.

Whether you use special liquid cooling or air cooling, it seems cooler to put the graphics card vertically. But we see that some of the coolers of the display cards take up to 3 PCI-Express slots.

Corsair has stated that it offers support for the display cardollaryel, which takes up up to 3 slots. However, there is no PCI-Express extension cable that comes with the case. You need to buy this separately.

Result Evaluation

Corsair selected the features that users liked and applied in smaller (Mid Tower) safes and adapted them to the 7000D Full Tower. The result is satisfactory to us.

Extended ATX size motherboard, multi graphics card, dedicated liquid cooling or multi s there are many important features such as the mechanical hard drive bay. If you think you will need them in your collection system, the Corsair 7000D AirFlow may be a good choice for you.


Like it? Share with your friends!

331
Michael Lewis

0 Comments

Your email address will not be published. Required fields are marked *