327

RAM has become one of the most sensitive components of computers today, as finding the best compatible RAM for your system can be more challenging. Especially for AMD Ryzen processors, the choice of RAM kit is a little more important than Intel processors, as it gets much more efficiency than Ryzen’s memory compatibility. In addition, lower latency values ​​and high frequency values ​​provide great benefits to Ryzen processors up to a certain point. That’s why choosing the right memory kit for your Ryzen 5000 series processor is crucial.

So, what do we pay attention to when choosing these ‘best’ RAMs? Most importantly, AMD processors and motherboards offer good compatibility across a wide range, especially among the new Ryzen 5000 series. Although the frequency and delay values ​​of the RAM kidollar series are mentioned as suggestions in our article, you can choose your preferred frequency and delay values ​​as you see fit. We’ve also considered features like overclocking to make it a more inclusive compilation.

1. G. Skill TridentZ Neo DDR4-3600 (2 x 8GB)

Pros:

  • High performance
  • Compatible with AMD
  • Impressive lighting and aesthetics
  • Overclock performance

Cons:

  • A bit expensive
Capacity: 16GB (2 x 8GB)
Frequency: 3600MHz (XMP)
Timing: 14-15-15-35 (2T)
Voltage: 1. 45V
Lighting: RGB
  • Click for price information.

G. Skill has been one of the top memory brands used in gaming computers. Neo series is one of them. Not only does this kit perform exceptionally, it is also one of the best looking RAM kidollar series on the market. It’s also specifically optimized for AMD processors, which means it will work very well with Ryzen 5000 series processors.

You can choose the memory with the frequencies and timings you prefer from the G. Skill RAM kidollar series, but we recommend the TridenZ Neo DDR4-3600 CL14 for this kit. The 3600 MHz frequency of the RAM provides the best performance for the Ryzen architecture as it is perfectly synchronized with the processor’s Infinity Fabric clock.

As for latency, it comes with timings of 14-15-15-35 (2T), which is great for latency sensitive applications. We can say that it has one of the best timings among the 3600 MHz RAM kidollar series on the market. It also performs much better than standard RAMs with CL16 or CL18 latency. Moreover, it achieves this timing and 3600 MHz at 1.45V voltage. This makes the TridentZ Neo a prime candidate for overclocking.

Aesthetically one of the best RAM kidollar series on the market with a brushed black and silver coated aluminum heat spreader. Modules, on the “G. It has a very distinctive angular design at the top of the module with RGB lighting that says “Skill”. RGB lighting can also be controlled with G. Skill TridentZ Lightning Control software or many motherboard software.

All in all, the G. Skill TridentZ Neo is an excellent choice for AMD Ryzen 5000 series processors. The recommended 3600 MHz CL14 memory kit will maximize the performance of your processor, while adding a beautiful look to your system with its aesthetics and RGB lighting.

2. Corsair Vengeance RGB Pro DDR4-3200 (4 x 8GB)


Pros:

  • Excellent performance
  • Wide range of compatibility
  • Elegant RGB lighting
  • Adjustable overclock

Cons:

  • Relatively more expensive
Capacity: 32GB (4 x 8GB)
Frequency: 3200MHz (XMP)
Timing: 16-18-18-36 (2T)
Voltage: 1. 35V
Lighting: RGB
  • Click for price information.

Corsair Vengeance RGB Pro is another RAM kit we chose for Ryzen 5000 processors with excellent performance and aesthetics. This memory kit offers two purchase options according to system compatibility, with both white and black color options. There is also a series of memory kidollars with different frequencies and timings.

Our Corsair Vengeance RGB Pro recommendation is for the RAM kit, which has 4 x 8GB modules that make up the 32GB version. Although 32 GB is a bit too much for games right now; Users who need extra memory capacity for video editing, 3D animation or other lines of business may consider this kit.

This kit in Corsair’s Vengeance RGB Pro series has CL16 latency and 3200 MHz frequency. Although these values ​​​​do not seem like the best for the Ryzen 5000, it is a little difficult to distinguish between the TridentZ Neo RAM we mentioned first. Moreover, this RAM kit from Corsair also offers good overclocking performance and adjustment margin. While this 32GB kit is comparatively more expensive than other 32GB kidollarser, Corsair’s reliability and the quality of the kit are worth the price.

With its white color option, it is very popular among users who are looking for color harmony to their system. The heat spreaders are understated and not as aggressive as the TridentZ, but the main attraction is the light bar. The RGB strip extends to the top of the modules along its length and tapers slightly from the side. The lighting of these modules is also controlled by Corsair’s iCUE software.

All in all, the Corsair Vengeance Pro RGB is not only a great looking memory kit, it also offers very good performance. This kit with high memory is one click ahead of its alternatives.

3. Patriot Viper Steel Series DDR4-4400 (2 x 8GB)

Pros:

  • High frequency value
  • Tight timings
  • Stealthy look
  • High overclocking performance

Cons:

  • Does not have lighting
Capacity: 16GB (2 x 8GB)
Frequency: 4400MHz (XMP)
Timing: 19-19-19-39 (2T)
Voltage: 1. 45V
Lighting: None
  • Click for price information.

If you’re looking for a high-speed memory kit, the Patriot Viper Steel Series DDR4-4400 kit may be for you. The Viper Steel series forgoes the high-market RGB lighting for a more robust, reliable and performance-oriented design. These modules have a fairly high frequency and overclocking margin.

For users looking for high-frequency memory for their Ryzen 5000 series processor, we recommend the Patriot Viper Steel Series DDR4-4400 kit. This RAM kit has a wide range of compatibility, but we recommend using an X570 motherboard for best performance. The 4400 MHz frequency can be achieved with the CL19 XMP profile, which ensures a high performance without being completely overpowered.

This particular kit has timings 19-19-19-39 (2T), which is good value for a frequency of 4400 MHz, although it may not have the best timings in the market. One of the best RAM kidollar series for overclocking, there’s also a lot of tuning potential in this kit. You can try to go much higher than the 4400 MHz frequency, or you can tighten the timings and lower the frequency with the recommended settings.

Aesthetically, as we said before, this kit is designed for performance rather than looks, and the cost is reduced by not adding any lighting. It has an aggressive and stealthy look with metal heat spreaders and the Viper logo in the middle.

If you are looking for a high-frequency RAM kit, you should definitely consider this kit from Patriot.

4. TEAMGROUP T-Force Xtreem ARGB DDR4-3200 (2 x 8GB)

Pros:

  • Has great performance
  • Optimized for AMD
  • Affordable prices

Cons:

  • Has a controversial aesthetic
  • Limited availability
Capacity: 16GB (2 X 8GB)
Frequency: 3200MHz (XMP)
Timing: 14-15-15-35 (2T)
Voltage: 1. 45V
Lighting: RGB
  • Click for price information.

If the lack of RGB lighting on the Patriot Viper has been a problem for you, the TEAMGROUP T-Force Xtreem ARGB kit may be for you. This high performance and well overclocked RAM kit offers us the most interesting design on the market with RGB lighting. Optimized for AMD, this RAM is an ideal candidate for the Ryzen 5000 series.

We recommend the T-Force Xtreem DDR4-3200 CL14 kit from the many options available. While 3200 MHz is not the fastest, it is sufficient for the Zen 3 architecture. There is also very little difference between the 3200 and 3600 MHz variants. The 3200 MHz option offers more flexibility in overclocking and tuning due to tighter timings and affordability.

The timings come in 14-15-15-35 (2T), which is extremely good for a 3200MHz kit. Users also have the option to increase the frequency of the kit by loosening the timings. In this way, it is possible to increase the performance one click in certain scenarios. The voltage required to reach XMP speed is 1.45V.

On the top and side of this kit, which has a somewhat controversial design in terms of aesthetics, there are RGB lights that have ARGB lighting and can be controlled by motherboard software. Whether you like this design or not depends on your visual taste. If you do the lighting right, you can even make it the show star of your system.

All in all the T-Force Xtreem ARGB kit is a great alternative to the other RAM kidollar series on this list. The 3200 MHz CL14 option is one click cheaper than the other RAM kidollar series.

5. Patriot Viper 4 Series DDR4-3200 (2 x 8GB)

Pros:

  • Great overclocking performance
  • Stylish red heat spreaders

Cons:

  • Does not have lighting
  • Green PCB plate
  • Expensive compared to its alternatives
Capacity: 16GB (2 x 8GB)
Frequency: 3200MHz (XMP)
Timing: 16-18-18-36 (2T)
Voltage: 1. 35V
Lighting: None
  • Click for price information.

The Patriot Viper 4 series is another performance-oriented RAM kit that offers good performance and high overclocking margin at a competitive price. Patriot has removed the ‘fancy’ details from this kit and made it a barebones option.

The model we recommend for the Viper 4 series is the DDR4-3200 CL16 option. It doesn’t make much sense to spend money on 3600 MHz or CL14 variants, instead it would make more sense to consider other RAM kidollar series such as Corsair Vengeance RGB Pro or GSkill TridentZ RGB.

One of the best features of this kit is that it has great overclocking capabilities. Patriot Viper 4 has a good margin of overclocking, both in terms of frequency and timings. With this kit, you can easily set both and get a stable configuration. This kind of tuning potential is rarely found in competitive fiyadollar kidollarser like the Viper 4 and is usually limited to higher quality kidollarser like TridentZ Neo. This kit is also ready to work with Ryzen 5000 series processors right out of the box in the recommended configuration.

The Viper 4 is definitely not among the kidollarser appealing to the present day. The RAM kit has a simple design with an aggressive looking red heat spreader that says “VIPER” in the middle. The modules are not illuminated and their PCBs are green, reminiscent of old-school DDR3 RAM modules. In these budgets, it can be used frequently in systems where appearance is not so important.

The Patriot Viper 4 is one of the most affordable kidollars in our article, and that doesn’t mean it performs badly. In the recommended configuration, Viper 4 performs quite well, its timings are ideal and it has a good overclocking margin.

For all your other questions and to learn the best parts for your processor, you can start a thread on Technopat Social.


Like it? Share with your friends!

327
Michael Lewis

0 Comments

Your email address will not be published. Required fields are marked *